Mitsubishi Outlander: Automatic transmission INVECS-III Sports Mode 6CVT (Intelligent & Innovative
Vehicle Electronic Control System III)
The INVECS-III uses optimization and adaptation functions to optimally match
the gear ratio to driving and road conditions.
The CVT is capable of changing the gear ratio automatically and steplessly to
suit driving conditions in all phases of vehicle operation. It therefore realizes
smooth, shock-free operation and excellent fuel efficiency.
Caution
► Automatic downshifts may not take place while the CVT fluid is still cool
immediately after you start driving. To cause a downshift, depress the brake pedal,
manually shift down when necessary.
Always strive to drive safely in accordance with road conditions.
READ NEXT:
The CVT selects an optimum gear ratio automatically, depending on the speed of
the vehicle and the position of the accelerator pedal.
The selector lever (A) has 2 gates; the main gate (B) and the m
When the ignition switch is turned to the “ON” position, the position of the
selector lever is indicated in the multi-information display.
“P” PARK
This position locks the transmission to prevent the vehicle from moving. The
engine can be started in this position.
“R” REVERSE
This position is to back up.
Caution
► N
SEE MORE:
The fuel gauge indicates the fuel level in the fuel tank irrespective of the
ignition switch position.
0- Empty 1- Full
CAUTION
Do not drive with an extremely low fuel level; running out of fuel could
cause damage to the catalytic converter.
NOTE
(1) The fuel lid mark (A) indicates the
Press the UNLOCK switch (2). All the doors and the tailgate will be unlocked.
If the doors and tailgate are unlocked when the front room lamp switch is in the
“DOOR” position or the rear room lamp switch (except for vehicles equipped with
the sunshade) is in the middle (•) position, the
© 2010-2026 Copyright www.mioutlander.com
