Mitsubishi Outlander: Chassis and underbody protection
Your vehicle’s underbody has been treated at the factory in order to protect it from rust and corrosion. Some areas have been injected with anti-corrosion agents and wax. The effectiveness of these measures, however, will be reduced by flying stones, road chemicals, etc., as the vehicle is driven. You should take your vehicle to your authorized MITSUBISHI dealer every 12 months to have body sheet metal inspected for condition, and it is recommended to have the underbody checked regularly (autumn and spring) and have additional protection treatment carried out as required.
As not all of the commercially available materials are suitable for use on your vehicle, it is recommended that you have this work carried out by an authorized MITSUBISHI dealer.
When washing the vehicle, especially in winter, spray the underbody with water to remove dirt and dust which might contain salts, road chemicals, etc.
READ NEXT:
Engine compartment
Clean the engine compartment at the beginning and end of winter. Pay particular
attention to flanges, crevices and peripheral parts where dust containing road chemicals
and other corrosive materia
If the vehicle breaks down
If the vehicle breaks down on the road, move it to the shoulder and use the hazard
warning flashers.
If the engine stops/fails
Vehicle operation and control are affected if the engine stops. Befor
SEE MORE:
Manual type
Pull the seat adjusting lever and adjust the seat forward or backward to the
desired position, and release the adjusting lever.
Warning
► To ensure the seat is locked securely, try to move the seat forward or backward
without using the adjusting lever.
Momentary fuel consumption display
While driving, this displays the momentary fuel consumption, using a bar graph.
When the momentary fuel consumption surpasses the average fuel consumption, the
momentary fuel consumption is displayed with a green bar graph.
(Type 2) Be conscious of maintaining the momentary fuel consumption ab
