Mitsubishi Outlander: Chrome parts
In order to prevent spots and corrosion of chrome parts, wash with water, dry thoroughly, and apply a special protective coating. This should be done more frequently in winter.
READ NEXT:
Servicing of plastic parts
Use a sponge or chamois leather. If a car wax adheres on a grey or black rough
surface of the bumper, moulding or lamps, the surface becomes white. In such a case,
wipe it off using lukewarm water
Aluminium wheels
A protective coating is provided over the aluminium type wheels.
Clean aluminium wheels with a cleaner designed for use on aluminium and apply
an appropriate protection agent.
NOTE
(1) When clean
Window glass
The window glass can normally be cleaned using only a sponge and water.
Glass cleaner can be used to remove oil, grease, dead insects, etc. After washing
the glass, wipe dry with a clean, dry, soft
SEE MORE:
Information screen display list
When there is information to be announced, such as lamp reminders, a sound is
emitted and the screen switches to the displays shown below. Refer to the appropriate
page and take the necessary measures.
When the cause of the warning display is eliminated, the warning display goes
out automatic
Engine coolant
To check the coolant level
A transparent coolant reserve tank (A) is located in the engine compartment.
The coolant level in this tank should be kept between the “LOW” and “FULL” marks
when measured while the engine is cold.
To add coolant
Petrol-powered vehicles
The cooling system
© 2010-2026 Copyright www.mioutlander.com
