Mitsubishi Outlander: Electronic immobilizer (Anti-theft starting system)
The electronic immobilizer is designed to reduce significantly the possibility of vehicle theft. The purpose of the system is to immobilize the vehicule if an invalid start is attempted. A valid start attempt can only be achieved (subject to certain conditions), using a key “registered” to the immobilizer system.
NOTE
(1) In the following cases the vehicle may not be able to receive the registered ID code from the key. This means the engine will not start even when the registered key is turned to the “START” position.
- When the key contacts a key ring or other metallic or magnetic object (Type A)
- When the key grip contacts metal of another key (Type B)
- When the key contacts another immobilizing key, or some other transponder (Type C)
In cases like these, remove the object or additional key from the vehicle
key and turn the key back to the “ACC” or “LOCK” position. Then try again to start
the engine. If the engine does not start, consult an authorized MITSUBISHI dealer.
(2) Be careful not to damage the key with a cutter etc. since there is a transponder
inside the key.
(3) Two keys are provided.
If you lose one of them, order a
key from your authorized MITSUBISHI dealer as soon as possible.
To obtain a key,
take your vehicle and any remaining keys to your authorized MITSUBISHI dealer.
If you need an extra spare key, take your vehicle and ALL the keys to your authorized
MITSUBISHI dealer. Because all the keys have to be re-registered in the immobilizer
computer unit. The immobilizer allows up to 8 different ID codes to be registered;
you can possess a maximum of 8 keys.
CAUTION
Don’t make any alterations or additions to the immobilizer system; any alterations or additions could cause failure of the immobilizer.
READ NEXT:
Doors
Operation from outside the vehicle
1- Insert or remove the key 2- Lock 3- Unlock
Operation from inside the vehicle
1- Lock 2- Unlock
Pull the inside door handle toward you to open the door.
W
Keyless entry system*
Press the remote control switch, and all doors and the boot lid (or tailgate)
will be locked or unlocked as desired. Pressing the LOCK switch (1) or UNLOCK switch
(2) will turn on the indicator
“Child-protection” rear doors
1- Lock 2- Free
Child protection helps to prevent doors from being opened accidentally, especially
when small children are in the rear seat.
A lever is provided on each rear door. If the lever i
SEE MORE:
Central door locks
Vehicles without the keyless entry system and vehicles without the keyless
operation system
Using the key on driver’s door locks or unlocks driver’s doors and the tailgate.
1- Lock.
2- Unlock.
NOTE:
● If the vehicle has a Dead Lock System and the Dead Lock System is set, turning
3–point type seat belt (with emergency locking mechanism)
This type of belt requires no length adjustment. Once worn, the belt adjusts
itself to the movement of the wearer, but in the event of a sudden or strong shock,
the belt automatically locks to restrain the wearer’s body.
To fasten
Pull the seat belt out slowly while holding the latch plate
