Mitsubishi Outlander manuals

Mitsubishi Outlander: Link System

The Link System takes overall control of the devices connected via the USB input terminal or the Bluetooth® 2.0 interface allowing the connected devices to be operated by using the switches in the vehicle or voice commands.

See the following section for details on how to operate.

Refer to “Bluetooth® 2.0 interface”.

Refer to “USB input terminal”.

Refer to “To play tracks from USB device”.

Refer to “To play tracks from a Bluetooth® device”.

Refer to “To use the external audio input function” on page .

Bluetooth® is a registered trademark of BLUETOOTH SIG, INC.

Link System End User Licence Agreement

You have acquired a device that includes software licensed by MITSUBISHI MOTORS CORPORATION from JOHNSON CONTROLS Inc (the automotive experience business unit), and their subsequent 3rd party suppliers. For a complete list of these 3rd party products and their end user licence agreements, please go to the following website.

http://www.jciblueconnect.com/faq.taf

READ NEXT:

 Bluetooth® 2.0 interface

The Bluetooth® 2.0 interface allows for making/receiving hands-free calls in the vehicle using a Bluetooth ® compatible cellular phone based on the wireless communication technology commonly kno

 Steering control switch

1- Volume up button 2- Volume down button 3- SPEECH button 4- PICK-UP button 5- HANG-UP button Volume up button Press this button to increase the volume. Volume down button Press this button

 Voice recognition function

The Bluetooth® 2.0 interface is equipped with a voice recognition function. Simply say voice commands and you can perform various operations and make or receive hands-free calls. With the Bluetoo

SEE MORE:

 Starting

Tips for starting • Do not operate the starter motor continuously longer than 10 seconds; doing so could run down the battery. If the engine does not start, turn the ignition switch back to “LOCK”, wait a few seconds, and then try again. Trying repeatedly with the starter motor still tu

 Brake fluid/Clutch fluid

The brake fluid and the clutch fluid share reservoir tank. To check the fluid level The fluid level must be between the “MAX” and “MIN” marks on the reservoir. The fluid level is monitored by a float. When the fluid level falls below the “MIN” mark, the brake fluid warning lamp li

© 2010-2026 Copyright www.mioutlander.com