Mitsubishi Outlander manuals

Mitsubishi Outlander: Manual window control*

1- To open 2- To close

1- To open
2- To close

READ NEXT:

 Electric window control*

The electric windows can only be operated with the ignition switch in the “ON” position. Each door window opens or closes while the corresponding switch is pressed. 1- Driver’s door window

 Driver’s switches

The driver’s switches can be used to operate all door windows. A window can be opened or closed by operating the corresponding switch. Press the switch down to open the window, and pull up the

 Passenger’s switches

The passenger’s switches can be used to operate the corresponding passenger’s door windows. Press the switch down to open the window, and pull up the switch to close it. If the switch is ful

SEE MORE:

 Removal of head restraints

To remove the head restraints, lift the head restraint with the height adjusting knob (A) pushed in. To install the head restraints, first confirm that they are facing in the correct direction, and then insert them into the seatback while pressing the height adjusting knobs (A) in the direc

 Coming home light

This function turns on the headlamps in the low beam setting for about 30 seconds after the ignition switch is turned to the “OFF” position or the operation mode is put in OFF. 1. Turn the combination headlamps and dipper switch to the “OFF” or “AUTO” position (for vehicles equipp

© 2010-2025 Copyright www.mioutlander.com