Mitsubishi Outlander: Parking
To park the vehicle, first bring it to a complete stop, fully engage the parking
brake and then move the selector lever to the “P” (PARK) position.
If you are going to leave the vehicle unattended, always switch off the engine
and remove the ignition key.
NOTE
On a slope, be sure to apply the parking brake before moving the selector
lever to the “P” (PARK) position. If you move the selector lever to the “P” (PARK)
position without first applying the parking brake, a stronger than normal resistance
force may be encountered. In this situation, move the selector lever strongly when
you next wish to drive.
READ NEXT:
To park the vehicle, first bring it to a complete stop, fully engage the parking
brake and then move the gear shift lever to 1st (on an uphill) or Reverse (on a
downhill) position, for vehicles
Parking on a slope
Fully engage the parking brake, and then move the gearshift lever to 1st (on
an uphill) or reverse (on a downhill) position on manual transmission vehicle. On
automatic transmi
All the parts of the brake system are critical to safety. Have the vehicle serviced
by an authorized MITSUBISHI dealer at regular intervals according to the service
booklet.
Brake system
(1) The
SEE MORE:
To fold out the underfloor-stowable third seat
The third seat is stowed under the floor. Use the seat when extra people ride
in your vehicle. When not in use, stow the seat under the floor and use as a luggage
area.
WARNING:
● Make sure that you arrange the third seat before starting to
Caution
► Do not place luggage or other items on the rear shelf panel. Any items on
the rear shelf panel would obstruct your rearward view, and they could fly forward
and cause injuries or other mishap in the event of hard braking.
To install
1. Insert the concave portion (A) on the un
© 2010-2025 Copyright www.mioutlander.com
