Mitsubishi Outlander: To operate without using the keyless operation function
Emergency key
The emergency key is built into the keyless operation key. If the keyless operation function cannot be used, for example because the keyless operation key battery has worn out or the vehicle battery is flat, you can lock and unlock the driver’s door with the emergency key. To use the emergency key (A), unlock the lock knob (B) and remove it from the keyless operation key (C).
NOTE
• Only use the emergency key for emergencies.
If the keyless operation key battery wears out, replace it as quickly as possible so that you can use the keyless operation key.
• After using the emergency key, always return it into the keyless operation key.
Locking and unlocking the driver’s door
Turning the emergency key in the forward direction locks the door, and turning it in the rear direction unlocks the door. Also refer to “Locking and unlocking: Doors”.
1- Lock
2- Unlock
READ NEXT:
Keyless entry system
Press the remote control switch, and all doors and the tailgate will be locked
or unlocked as desired. It is also possible to operate the outside rear-view mirrors.
1- LOCK () switch
2- UNLOCK
Doors
CAUTION
• Make sure the doors are closed: driving with doors not completely closed
is dangerous.
• Never leave children in the vehicle unattended.
• Be careful not to lock the doors while
Central door locks
NOTE
• Each of the doors can be locked or unlocked independently by using the inside
lock knob.
• When locking or unlocking with the key on the driver’s door, only the driver’s
door wil
SEE MORE:
Demisting of the windscreen and door windows
CAUTION
For safety, make sure you have a clear view through all windows.
To remove frost or mist from the windscreen and door windows, use the mode selection
dial (“” or “”).
- To keep the windscreen and door
windows clear of mist, and to keep leg area heating (when driving in rain
Engine compartment
Clean the engine compartment at the beginning and end of winter. Pay particular
attention to flanges, crevices and peripheral parts where dust containing road chemicals
and other corrosive materials might collect.
If salt and other chemicals are used on the roads in your area, clean the engine
