Mitsubishi Outlander: USB control panel and display

1- AM/FM button
2- CD (Mode change) button
3- PWR (On-Off) button
4- DISP (Title display) button
5- PAGE (Title scroll) button
6- RPT (Repeat) button
7- RDM (Random) button
8-
(Fast-reverse) button
9-
(Fast-forward) button
10- U (USB) indicator
11- FOLDER indicator
12- TRACK indicator
13- RPT/D-RPT/RDM/D-RDM/SCAN/F-SCAN indicator
14- DISC UP button
15- SCAN button
16- FOLDER switch
17- TRACK (Track up/down) button
READ NEXT:
1. Press the PWR button to turn on the audio system.
The system turns on in the last mode used.
2. Connect your USB memory device to the USB input terminal.
Refer to “How to connect a USB memory
Desired tracks can be selected and played from your USB memory device by “Artist”,
“Album”, “Playlist” and “Genre” using voice commands.
For information concerning the voice recogni
You can wirelessly connect a digital audio player or cellular phone supporting
Bluetooth® to listen to the tracks on the connected device.
Refer to “Bluetooth® 2.0 interface” for the connecti
SEE MORE:
For vehicles equipped with a M/T, when removing the key, push the key in at the
“ACC” position and keep it depressed until it is turned to the “LOCK” position,
and remove it.
For vehicles with CVT or Twin Clutch SST, when removing the key, first set the
selector lever (CVT) or gears
1. If a wheel cover is installed, first remove the cover. (Refer to “Wheel covers”.)
Then loosen the wheel nuts a quarter turn with the wheel nut wrench. Do not remove
the wheel nuts yet.
2. Place the jack under one of the jacking points (A) shown in the illustration.
Use the jacking po
© 2010-2025 Copyright www.mioutlander.com
