Mitsubishi Outlander manuals

Mitsubishi Outlander: Vehicle labeling

Vehicle identification number

The vehicle identification number is stamped on the bulkhead as shown in the illustration.

Vehicle information code plate

Vehicle information code plate

The vehicle information code plate is riveted as shown in the illustration.

The plate shows model code, engine model, transmission model and body colour

The plate shows model code, engine model, transmission model and body colour code, etc.

Please use this number when ordering replacement parts.

1- Model code

1- Model code
2- Engine model code
3- Transmission model code
4- Body colour code
5- Interior code
6- Option code
7- Exterior code

Vehicle identification number plate (RHD vehicles only)

The vehicle identification number is stamped on the plate riveted to the left front corner of the vehicle body. It is visible from outside of the vehicle through the windscreen.

Engine number

Engine number

The engine number is stamped on the engine cylinder block as shown in the illustrations.

Petrol-powered vehicles

Diesel-powered vehicles

Diesel-powered vehicles

Vehicle dimensions

READ NEXT:

 Vehicle dimensions

 Vehicle performance

Petrol-powered vehicles Diesel-powered vehicles

 Vehicle weight

Petrol-powered vehicles NOTE • Trailer specifications indicate the manufacturer’s recommendation. NOTE • Trailer specifications indicate the manufacturer’s recommendation. Diesel-po

SEE MORE:

 Fuses

Fuse block location To prevent damage to the electrical system due to shortcircuiting or overloading, each individual circuit is provided with a fuse. There are fuse blocks in the passenger compartment and in the engine compartment. Passenger compartment (LHD vehicles) The fuse blocks in the p

 Welcome light (for vehicles equipped with the keyless entry system or the keyless operation system)

Except for vehicles for Russia, Kazakhstan and Ukraine, this function turns on the position and tail lamps for about 30 seconds after the UNLOCK switch (A) on the remote control transmitter is pressed when the combination headlamps and dipper switch is in the “OFF” or “AUTO” position (

© 2010-2025 Copyright www.mioutlander.com