Mitsubishi Outlander: Volume and tone control panel
1- PWR (On-Off) switch
2- VOL (Volume control) knob
3- Display
4- SOUND (Sound control) switch
To adjust the volume
VOL (Volume control)
Turn the VOL knob clockwise to increase the volume;
anticlockwise to decrease the volume.
To adjust the tone
Press the SOUND switch to select: SUB PUNCH → TYPE → FIELD → BASS → MID → TREBLE → FADER → BALANCE → audio control mode OFF.
NOTE
• The SUB PUNCH can only be adjusted on vehicles with a premium sound system.
On vehicles without a premium sound system, when you press the SOUND switch, the display starts from TYPE.
QUICK ACCESS MODE
To access the sound customization features quickly, push and hold the SOUND switch, then turn the switch clockwise or anticlockwise to access your desired sound customization setting. Release the switch to adjust the setting.
HOLD MODE
If the SOUND switch is pushed and held for more than 2 seconds during the audio adjust mode, it will change to “Hold” mode. The selected audio mode will be held until the SOUND switch is pushed for more than 2 seconds again.
SUB PUNCH (Subwoofer volume control)
To select the desired subwoofer volume level.
TYPE (Acoustic characteristic selection)
1. Turn the SOUND switch to select the desired music type.
2. Press the SOUND switch to set the audio system to the selected music type.
FIELD (Sound field selection)
1. Turn the SOUND switch to select the desired sound field.
2. Press the SOUND switch to set the audio system to the selected sound field.
BASS (Bass tone control)
Turn the SOUND switch to select the desired bass tone.
MID (Midrange tone control)
Turn the SOUND switch to select the desired middle tone
TREBLE (Treble tone control)
Turn the SOUND switch to select the desired treble tone.
FADER (Front/Rear balance control)
Turn the SOUND switch to balance volume from the front and rear speakers.
BALANCE (Left/Right balance control)
Turn the SOUND switch to balance volume from the left and right speakers.
NOTE
• When set to 0, it will beep.
• When SUB PUNCH, TYPE or FIELD is changed, the sound will cut out briefly, but this does not indicate a malfunction.
• The audio control mode will shut off if either the radio or CD is operated, or if no adjustment is made within about 10 seconds.
READ NEXT:
SCV (Speed Compensated Volume) function
SCV function is a feature that automatically adjusts the VOLUME, BASS, MID, and
TREBLE settings in accordance with the vehicle speed.
The SCV function can be turned ON and OFF.
Refer to “Functio
Radio control panel and display
1- PWR (On-Off) switch
2- AM/FM (FM/MW/LW selection) button
3- FM (FM1/FM2/FM3) indicator
4- ST (Stereo) indicator
5- Memory select buttons
6- TUNE switch
7- SEEK (Up-seek) button
8- SEEK (Do
To listen to the radio
1. Press the PWR switch or the AM/FM button to turn ON the radio.
Press the PWR switch again to turn OFF the radio.
2. Press the AM/FM button to select the desired band.
3. Turn the TUNE switch, or
SEE MORE:
Roof antenna
To remove the roof antenna, turn it counterclockwise.
CAUTION
Be sure to remove the roof antenna before entering an automatic car wash or
other low-roofed area.
NOTE
Be sure to remove the antenna in the following cases:
When entering a place with low clearance. When going into an automatic
Installation position for first–aid kit
Hatchback
The trunk side trim is provided with the securing bands for the first–aid kit.
1- Securing bands for the first–aid kit.
Sedan
To approach to the securing bands for the first–aid kit (1), push the knob (2)
to unlock and then turn down the cover (3).
NOTE
Only a securing ba
