Mitsubishi Outlander: Washer fluid

Check the washer fluid level in the container. If the level is low, replenish
as required.
NOTE
The washer fluid container serves the windscreen, rear window, and headlamps
(if so equipped).
READ NEXT:
To ensure proper operation of the washers at low temperatures, use a fluid containing
an anti–freezing agent.
1- Location of tread wear indicator 2- Tread wear indicator
Check the tyres for cuts, cracks and other damage. Replace the tyres if there
are deep cuts or cracks. Also check each tyre for pieces
Check the tyre inflation pressure of all the tyres while they are cold: if insufficient
or excessive, adjust to the specified value. After the tyre inflation pressure
has been adjusted, check th
SEE MORE:
If you are carrying the keyless operation key, enter the operating range of the
keyless operation system, and operate a door or rear hatch switch, the ID code for
your key is verified.
You can only lock and unlock the doors and rear hatch, and start the engine if
the ID codes of your keyless
Select the control mode from the following two types to suit the driving conditions.
Note
► When continuously driving on closed circuit tracks or at other locations where
the engine is operated at high speeds and under a heavy load, the Twin Clutch SST
fluid temperature will have a te
© 2010-2025 Copyright www.mioutlander.com
