Mitsubishi Outlander manuals

Mitsubishi Outlander: Weatherstripping

To prevent freezing of the weatherstripping on the doors, bonnet, etc., they should be treated with silicone grease.

READ NEXT:

 Additional equipment (For regions where snow is encountered)

It is a good idea to carry a shovel or a short-handled spade in the vehicle during the winter so that you can clear away snow if you get stranded. A small hand-brush for sweeping snow off the vehi

 Specifications

 Chassis number

The chassis number is stamped on the bulkhead as shown in the illustration.

SEE MORE:

 Cooling (Vehicles with air conditioning)

Set the mode selection dial to the “” position. Set the air selection switch (A) to the outside position and push the air conditioning switch (B). Adjust the temperature by turning the temperature control dial clockwise or anticlockwise. Select the desired blower speed. NOTE If the o

 Stop and tail lamps and rear turn-signal lamps

1. Insert a straight blade (or minus) screwdriver with the end covered with a cloth or other object at the edge of the cover and pry gently to remove the cover. 2. Remove the socket and bulb assemblies by turning them anticlockwise. A- Rear turn-signal lamp B- Stop and tail lamp 3. Remove

© 2010-2025 Copyright www.mioutlander.com