Mitsubishi Outlander: Average fuel consumption display
This displays the average fuel consumption from the last reset to the present time.
There are the following 2 mode settings.
For information on how to change the average fuel consumption display setting, refer to “Changing the function settings (when the ignition switch or the operation mode is ON)”.
The 
mark (A) in the momentary fuel
gauge shows the average fuel consumption. (Type 2)
Manual reset mode
• When the average fuel consumption is being displayed, if you hold down the multi-information meter switch, the average fuel consumption displayed at that time is reset.
• When the following operation is performed, the mode setting is automatically switched from manual to auto.
[Except for vehicles equipped with keyless operation system]
Turn the ignition switch from the “ACC” or “LOCK” position to the “ON” position.
[For vehicles equipped with keyless operation system]
Change the operation mode from ACC or OFF to ON.
Switching to auto occurs automatically. If switching to manual mode is done, however, the data from the last reset is displayed.
Auto reset mode
• When the average fuel consumption is being displayed, if you hold down the multi-information meter switch, the average fuel consumption displayed at that time is reset.
• When the engine switch or the operation mode is in the following conditions, the average fuel consumption display is automatically reset.
[Except for vehicles equipped with keyless operation system]
The ignition switch is in the “ACC” or “LOCK” position for about 4 hours or longer.
[For vehicles equipped with keyless operation system]
The operation mode is in ACC or OFF for about 4 hours or longer.
NOTE
• The average speed display and the average fuel consumption display can be reset individually for the auto reset mode and manual reset mode.
• “---” is displayed when the average fuel consumption cannot be measured.
• The initial (default) setting is “Auto reset mode”.
• The average fuel consumption depends on the driving condition (road condition, driving behavior, etc.). The displayed fuel consumption may vary from the actual fuel consumption.
Treat the fuel consumption displayed as just a rough guideline.
• The memory of the auto reset mode or manual reset mode for the average fuel consumption display is erased if the battery is disconnected.
• The display setting can be changed to the preferred units {km/L, mpg (US), mpg (UK) or L/100 km}. Refer to “Changing the function settings (when the ignition switch or the operation mode is ON)”.
READ NEXT:
Momentary fuel consumption display
While driving, this displays the momentary fuel consumption, using a bar graph.
When the momentary fuel consumption surpasses the average fuel consumption, the
momentary fuel consumption is displ
Function setting screen
The “Display language”, “Temperature unit”, “Fuel consumption unit”, and “Average
fuel consumption and speed reset method” etc. settings can be modified as desired.
Refer to “Ch
Interrupt display screen (when the ignition switch or the operation mode is
ON)
Warning display
When there is information to be announced, such as a system fault, a sound is
emitted and the information screen switches to the warning display screen.
Refer to the warning list a
SEE MORE:
Cancelling the system
The following methods can be used to cancel the system when it is in the system
preparation mode or the system armed mode.
► Pressing the UNLOCK switch on the remote control switch.
► Turning the ignition switch to the “ON” position.
► Opening any of the doors or the rear
Service precautions
Adequate care of your vehicle at regular intervals serves to preserve the value
and appearance as long as possible.
Maintenance items as described in this owner’s manual can be performed by the
owner.
We recommend you to have the periodic inspection and maintenance performed by
a MITSUBISH
