Mitsubishi Outlander: Average speed display
This displays the average speed from the last reset to the present time.
There are the following 2 mode settings.
For the method for changing the average speed display setting, refer to “Changing the function settings (when the ignition switch or the operation mode is ON)”.
Manual reset mode
• When the average speed is being displayed, if you hold down the multi-information meter switch, the average speed displayed at that time is reset.
• When the following operation is performed, the mode setting is automatically switched from manual to auto.
[Except for vehicles equipped with keyless operation system]
Turn the ignition switch from the “ACC” or “LOCK” position to the “ON” position.
[For vehicles equipped with keyless operation system]
Change the operation mode from ACC or OFF to ON.
Switching to auto occurs automatically. If switching to manual mode is done, however, the data from the last reset is displayed.
Auto reset mode
• When the average speed is being displayed, if you hold down the multi-information meter switch, the average speed displayed at that time is reset.
• When the engine switch or the operation mode is in the following conditions, the average speed display is automatically reset.
[Except for vehicles equipped with keyless operation system]
The ignition switch is in the “ACC” or “LOCK” position for about 4 hours or longer.
[For vehicles equipped with keyless operation system]
The operation mode is in ACC or OFF for about 4 hours or longer.
NOTE
• The average speed display and the average fuel consumption display can be reset individually for the auto reset mode and manual reset mode.
• “---” is displayed when the average speed cannot be measured.
• The initial (default) setting is “Auto reset mode”.
• The display setting can be changed to the preferred units (km/h or mph).
Refer to “Changing the function settings (when the ignition switch or the operation mode is ON)”.
• The memory of the auto reset mode or manual reset mode for the average speed display is erased if the battery is disconnected.
READ NEXT:
Average fuel consumption display
This displays the average fuel consumption from the last reset to the present
time.
There are the following 2 mode settings.
For information on how to change the average fuel consumption display s
Momentary fuel consumption display
While driving, this displays the momentary fuel consumption, using a bar graph.
When the momentary fuel consumption surpasses the average fuel consumption, the
momentary fuel consumption is displ
Function setting screen
The “Display language”, “Temperature unit”, “Fuel consumption unit”, and “Average
fuel consumption and speed reset method” etc. settings can be modified as desired.
Refer to “Ch
SEE MORE:
Centre panel
1. Audio
MITSUBISHI Multi-Communication System®
Refer to the separate “MITSUBISHI Multi-Communication System owner’s manual”
2. Front passenger seat belt warning lamp
3. Rear window demister switch (LHD vehicles)
4. Air conditioning
Heater
5. Cigarette lighter
Accessory socket
6.
Driver’s and passenger’s front air bag system
The driver’s air bag is located under the padded cover in the middle of the steering
wheel. The front passenger air bag is contained in the instrument panel above the
glove box.
The driver air bag and the front passenger air bag are designed to inflate at
the same time even if the passeng
