Mitsubishi Outlander manuals

Mitsubishi Outlander: Change of the blower speed

Adjust the blower speed by turning the blower speed selection dial clockwise

Adjust the blower speed by turning the blower speed selection dial clockwise or anticlockwise.

The blower speed will gradually increase as the dial is turned to the right.

Blower speed indicator (A) is displayed in the multi centre display.

Blower speed indicator (A) is displayed in the multi centre display.

READ NEXT:

 Demisting of the windscreen and door windows

CAUTION For safety, make sure you have a clear view through all windows. To remove frost or mist from the windscreen and door windows, use the mode selection dial (“” or “”). - To keep

 Cooling

Set the mode selection dial to the “” position. Set the air selection switch (A) to the outside position and push the air conditioning switch (B). Adjust the temperature by turning the tem

 To stop the air conditioning

By setting the blower speed selection dial to the “” (OFF) position. All operations will stop except the change of air selection.

SEE MORE:

 Fuse block

To prevent damage to the electric system due to short-circuiting or overloading, each individual circuit is provided with a fuse. There are fuse boxes in the passenger compartment and in the engine compartment. The fuse box in the passenger compartment is located in front of the driver’s

 Headlamp washer switch

The headlamp washer can be operated with the ignition switch or the operation mode in ON or ACC and the lamp switch at the position. Push the button once and the washer fluid will be sprayed on to the headlamps. NOTE • If the ignition switch or the operation mode is in ON or ACC and the

© 2010-2026 Copyright www.mioutlander.com