Mitsubishi Outlander: Automatic air conditioning*
The air conditioning can only be operated while the engine is running.
CAUTION
When using the air conditioning, the idling speed may slightly increase as the air conditioning compressor is switched on/off automatically. Especially for vehicles with an automatic transmission, while the vehicle is stationary, fully depress the brake pedal to prevent the vehicle from creeping.
NOTE
(1) There is a photo sensor, atmosphere temperature sensor and interior air temperature sensor inside the vehicle.
A- Photo sensor
B- Atmosphere temperature sensor
C- Interior air temperature
sensor
Never place anything on top of the cover of these sensors, doing so will prevent them from functioning properly.
(2) The cool air form the ventilators may appear as a mist. This is due to moist air being suddenly cooled by the air conditioning. This will clear after a few moments.
- Operating the system as an automatic air conditioning
- Operating the system as a manual air conditioning
- Change of mode selection
- Change of air selection
- Change of the blower speed
- Demisting of the windscreen and door windows
- Cooling
- To stop the air conditioning
- Important operation tips for air conditioning
- Air conditioning system refrigerant and lubricant recommendations
- During a long period of disuse
READ NEXT:
Operating the system as an automatic air conditioning
In normal conditions, use the system in the AUTO mode and follow these procedures:
1- Set the blower speed selection dial to “AUT” position.
2- Turn the temperature control dial to set the des
Operating the system as a manual air conditioning
If you operate the blower speed selection dial or the mode selection dial as
you desired, the system is still automatically controlled except selected function
which dial is operated. To return al
Change of mode selection
The mode selection dial is operated according to the need.
Turn the dial and the air outlet will be changed.
Air flow indicator (A) is displayed in the multi centre display.
A: From front a
SEE MORE:
Link System
The Link System takes overall control of the devices connected via the USB input
terminal or the Bluetooth® 2.0 interface allowing the connected devices to be operated
by using the switches in the vehicle or voice commands.
See the following section for details on how to operate.
Refer to “
Parking with the engine running
Never leave the engine running while you take a short sleep/rest, or you open
or close a gate or garage door, etc. Also, never leave the engine running in a closed
or poorly ventilated place.
Warning
► Leaving the engine running risks injury or death from accidentally moving
the gears
