Mitsubishi Outlander manuals

Mitsubishi Outlander: Operating the system as a manual air conditioning

If you operate the blower speed selection dial or the mode selection dial as you desired, the system is still automatically controlled except selected function which dial is operated. To return all operations to automatic operation, set the dials to “AUT” (AUTO) position.

READ NEXT:

 Change of mode selection

The mode selection dial is operated according to the need. Turn the dial and the air outlet will be changed. Air flow indicator (A) is displayed in the multi centre display. A: From front a

 Change of air selection

Every time the air selection switch is pressed, alteration is made between outside air introduction and inside air recirculation. When inside air is recirculated, the indicator lamp (A) comes on

 Change of the blower speed

Adjust the blower speed by turning the blower speed selection dial clockwise or anticlockwise. The blower speed will gradually increase as the dial is turned to the right. Blower speed indicat

SEE MORE:

 Vehicle labeling

1-Vehicle identification number The vehicle identification number is stamped on the bulkhead as shown in the illustration. 2-Vehicle information code plate The vehicle information code plate is riveted as shown in the illustration. The plate shows model code, engine model, transmission model

 To deactivate

The Auto Stop & Go (AS&G) system is automatically activated when the ignition switch is turned to the “ON” position. You can deactivate the system by pressing the “Auto Stop & Go (AS&G) OFF” switch. When the Auto Stop & Go (AS&G) system is deactivated, the disp

© 2010-2026 Copyright www.mioutlander.com