Mitsubishi Outlander: Change of mode selection
The mode selection dial is operated according to the need.
Turn the dial and the air outlet will be changed.
Air flow indicator (A) is displayed in the multi centre display.
A: From front and side demister
B: From centre and side ventilators
C: From
under the instrument panel
D: From under the front seat
(Face position)
Air flows to the upper part of the passenger compartment.
(Foot/Face position)
Air flows to the upper part of the passenger compartment, and the leg area.
(Foot position)
Air flows to the leg areas.
(Foot/demister position)
Air flows to the leg area, windscreen and door windows.
(Demister position)
Air flows to the windscreen and the door windows.
NOTE
Air always flows out from the centre and side ventilators regardless of the mode selection dial position.
READ NEXT:
Change of air selection
Every time the air selection switch is pressed, alteration is made between outside
air introduction and inside air recirculation. When inside air is recirculated,
the indicator lamp (A) comes on
Change of the blower speed
Adjust the blower speed by turning the blower speed selection dial clockwise
or anticlockwise.
The blower speed will gradually increase as the dial is turned to the right.
Blower speed indicat
Demisting of the windscreen and door windows
CAUTION
For safety, make sure you have a clear view through all windows.
To remove frost or mist from the windscreen and door windows, use the mode selection
dial (“” or “”).
- To keep
SEE MORE:
To adjust seat height (driver’s seat only)
Manual type
To adjust the seat height, operate the lever repeatedly to adjust.
1- Raise
2- Lower
Power type
To adjust the seat height, operate the switch as indicated by arrows.
NOTE
• To prevent the battery from discharging, use the power seat while the engine
is on.
1- To move the
3–point type seat belt (with emergency locking mechanism)
This type of belt requires no length adjustment. Once worn, the belt adjusts
itself to the movement of the wearer, but in the event of a sudden or strong shock,
the belt automatically locks to restrain the wearer’s body.
To fasten
Pull the seat belt out slowly while holding the latch plate
