Mitsubishi Outlander: Error codes (iPod)
If an error code appears in the display, take action in accordance with the table below.
READ NEXT:
Error codes (USB memory device)
If an error code appears in the display, take action in accordance with the table
below.
Handling of compact discs
• Use only the type of compact discs that have the mark shown in the illustration
below.
(Playback of CD-R or CD-RW discs may cause problems.)
• The use of special shaped, damaged compact di
Antenna
To remove
Turn the pole (A) anticlockwise.
To install
Screw the pole (A) clockwise into the base (B) until it is securely retained
NOTE
• Be sure to remove the roof antenna in the following
SEE MORE:
When turning from “ACC” to “LOCK”
[Vehicles equipped with M/T] Put the gearshift lever into the “N” (Neutral) position,
and slowly turn the ignition switch to the “LOCK” position while pressing it.
[Vehicles equipped with CVT or Twin Clutch SST] First, set the selector lever
(CVT) or the gearshift lever (Twin Clutch SST
Height adjustment
Adjust the head restraint height so that the centre of the restraint is as close
as possible to eye level to reduce the chances of injury in the event of collision.
Any person too tall for the restraint to reach their seated eye level, should adjust
the restraint as high as possible.
To rai
© 2010-2025 Copyright www.mioutlander.com
