Mitsubishi Outlander: Filling the fuel tank
WARNING
• When handling fuel, comply with the safety regulations displayed by garages and filling stations.
• Gasoline is highly flammable and explosive.
You could be burned or seriously injured when handling it. When refueling your vehicle, always turn the engine off and keep away from flames, sparks, and smoking materials. Always handle fuel in well-ventilated outdoor areas.
• Before removing the fuel cap, be sure to get rid of your body’s static electricity by touching a metal part of the car or the fuel pump. Any static electricity on your body could create a spark that ignites fuel vapour.
• Perform the whole refueling process (opening the fuel tank filler door, removing the fuel cap, etc.) by yourself. Do not let any other person come near the fuel tank filler. If you allowed a person to help you and that person was carrying static electricity, fuel vapour could be ignited.
• Do not move away from the fuel tank filler until refueling is finished. If you moved away and did something else (for example, sitting on a seat) part-way through the refueling process, you could pick up a fresh charge of static electricity.
• If the tank cap must be replaced, use only a MITSUBISHI MOTORS original part.
Fuel tank capacity
2WD models: 63 litres
4WD models: 60 litres
Refueling
1. Before filling with fuel, stop the engine.
2. The fuel tank filler is located on the rear left side of your vehicle.
Open the fuel tank filler door by pulling the release lever located on the side of the driver’s seat.
3. Remove the fuel cap.
Open the fuel tank filler tube by slowly turning the cap anticlockwise.
1- Remove
2- Close
4. While filling with fuel, hang the fuel cap cord on the hook located on the inside of the fuel tank filler door.
CAUTION
• Since the fuel system may be under pressure, remove the fuel cap slowly. This relieves any pressure or vacuum that might have built up in the fuel tank. If you hear a hissing sound from the cap, wait until it stops before removing the cap. Otherwise, fuel may spray out, injuring you or others.
5. Insert the gun in the tank port as far as it goes.
CAUTION
• Do not tilt the gun.
6. When the gun stops automatically, do not fill with fuel any more.
7. Close the fuel cap.
To close, turn the fuel cap slowly clockwise until you hear clicking sounds, then gently push the fuel tank filler door closed.
READ NEXT:
Installation of accessories
We recommend you to consult a MITSUBISHI MOTORS Authorized Service Point.
• The installation of accessories, optional parts, etc., should only be carried
out within the limits prescribed by law i
Modification/alterations to the electrical or fuel systems
MITSUBISHI MOTORS CORPORATION has always manufactured safe, high quality vehicles.
In order to maintain this safety and quality, it is important that any accessory
that is to be fitted, or any mod
Genuine parts
MITSUBISHI MOTORS has gone to great lengths to bring you a superbly crafted automobile
offering the highest quality and dependability.
Use MITSUBISHI MOTORS Genuine Parts, designed and manufactured
SEE MORE:
ACD warning display
When there is a malfunction in the system, the warning display will appear on
the information screen in the multi-information display.
In addition, the ACD control mode display in section (A) will go out at the same
time.
Caution
► The system may be malfunctioning.
Park your vehicle
To temporarily increase or decrease the speed
To temporarily increase the speed
Depress the accelerator pedal as you would normally.
When you release the pedal, you will return to your set speed.
Note
► In some driving conditions, the set speed driving may be deactivated. If this
happens, refer to “To activate” and repeat the
