Mitsubishi Outlander manuals

Mitsubishi Outlander: Front fog lamp switch*

The front fog lamp can be operated when the headlamps or tail lamps turn on.

The front fog lamp can be operated when the headlamps or tail lamps turn on. Push the switch to turn on the front fog lamps, and push the switch again to turn them off.

The indication lamp in the instrument cluster will illuminate while the front fog lamp is on.

NOTE

(1) The front fog lamps are automatically turned off when the headlamps and tail lamps turn off.
To turn on the front fog lamps again, push the switch again when the headlamps or tail lamps turn on.
(2) In case of vehicles with Daytime Running Lamp, the front fog lamps can be operated even if the lamp switch is set to the “low beam of the headlamps, tail lamps, etc. illuminate when the ignition key is” (OFF) position, because the low beam of the headlamps, tail lamps, etc. illuminate when the ignition key is at the “ON” position.

READ NEXT:

 Rear fog lamp switch

The rear fog lamp can be operated when the headlamps or front fog lamps (if so equipped) turn on. Push the switch to turn on the gear fog lamp, and push the switch again to turn it off. The ind

 Rheostat (meter illumination control)

The rheostat can be adjusted while the lamp switch is “” or “”. Turn the dial to adjust the meter illumination to the desired brightness. 1- To increase brightness 2- To reduce brightne

 Horn switch

When the ignition switch is in the “ON” or “ACC” position, pressing the “” mark on the steering wheel, causes the horn to sound.

SEE MORE:

 Doors

Operation from outside the vehicle 1- Insert or remove the key 2- Lock 3- Unlock Operation from inside the vehicle 1- Lock 2- Unlock Pull the inside door handle toward you to open the door. When the inside door handle of the front door is pulled, the door can be opened even if the door is

 Using the MIVEC engine

The MIVEC engine automatically controls valve timing in accordance with driving conditions for maximum engine performance. Note ► To protect the engine, the high-speed mode may not be selected while the engine coolant temperature is low. 11. Remove the keyless operation key from the em

© 2010-2026 Copyright www.mioutlander.com