Mitsubishi Outlander: Heater/Air conditioning
The heater/air conditioning can only be used while the engine is running.
READ NEXT:
Control panel
A- Temperature control dial
B- Air selection switch
C- Blower speed selection dial
D- Air conditioning switch
E- Mode selection dial
F- Rear window demister switch
NOTE
• On vehicles with
Operating the air conditioning system
Heating (Heater/Manual air conditioning)
Set the mode selection dial to the
position and set the air selection
switch (A) to the outside position.
Turn the temperature control dial clockwise or
Important operation tips for the air conditioning
• Park the vehicle in the shade.
Parking in the hot sun will make the vehicle inside extremely hot, and it will
require more time to cool the interior.
If it is necessary to park in the sun, ope
SEE MORE:
To operate using the keyless operation function
Locking the doors and tailgate
When you are carrying the keyless operation key, if you press the driver’s or
front passenger’s door lock/unlock switch (A), or the tailgate LOCK switch (B) within
the operating range, the doors and the tailgate are locked.
The turn-signal lamps will blink on
Front passenger’s airbag OFF indication lamp
The front passenger’s airbag OFF indication lamp is located in the instrument
panel.
The indicator normally illuminates when the ignition switch is turned to the
“ON” position or the operation mode is put in ON, and goes off a few seconds later.
When the front passenger’s airbag ON-O
© 2010-2026 Copyright www.mioutlander.com
