Mitsubishi Outlander: If the vehicle breaks down
If the vehicle breaks down on the road, move it to the shoulder and turn on the hazard warning flashers and set up a warning triangle, flashing lamp, etc.
Refer to “Hazard warning flasher switch”.
If the engine stops/fails
Vehicle operation and control are affected if the engine stops.
Before moving the vehicle to a safe area, be aware of the following:
• The brake booster becomes inoperative and the pedal effort will increase. Press down the brake pedal harder than usual.
• Since the power steering system is no longer operative, the steering wheel feels heavy when turning it.
READ NEXT:
Emergency starting
If the engine cannot be started because the battery is weak or dead, the battery
from another vehicle can be used with jumper cables to start the engine.
WARNING
• To start the engine using jum
Engine overheating
When the engine is overheating, the information screen in the multi-information
display will be interrupted and the engine coolant temperature warning display will
appear. Also will blink.
If th
Tools, jack and tyre repair kit
Storage
The tools, jack and tyre repair kit are stowed in the luggage compartment.
The storage location of the tools, jack and tyre repair kit should be remembered
in case of an emergency.
1- T
SEE MORE:
Front fog lamps (Type 2)
1. Remove the screw (A).
2. Pull the cover out in the direction of the arrow shown in the illustration.
3. Remove the screws (B) and pull the entire lamp unit out.
Note
► When unfastening the screws, be careful not to mistakenly move the beam position
adjustment screw (C).
4. P
Waiting
For short waiting periods, such as at traffic lights, the vehicle can be left
in gear and held stationary with the service brake.
For longer waiting periods with the engine running, the selector lever should
be placed in the “N” (NEUTRAL) position.
CAUTION
(1) Never hold the vehicle stati
© 2010-2025 Copyright www.mioutlander.com
