Mitsubishi Outlander: If the warning display appears while driving
Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / Starting and driving / Power steering system / Electric power steering system (EPS) / If the warning display appears while driving
1. Stop the vehicle in a safe place and turn off the engine.
2. Wait approximately 30 seconds and then restart the engine to check whether the
warning display goes out; if it then remains off, there is no problem.
If the warning display does not go out, or it appears again while driving, we recommend you to have your vehicle inspected.
READ NEXT:
Active stability control (ASC)
The Active Stability Control (ASC) takes overall control of the anti-lock brake
system (ABS), traction control function and stability control function to help maintain
the vehicle’s control and
Traction control function
On slippery surfaces, the traction control function prevents the drive wheels
from excessive spinning, thus helping the vehicle to start moving from a stopped
condition. It also provides sufficien
Stability control function
The stability control function is designed to help the driver maintain control
of the vehicle on slippery roads or during rapid steering manoeuvres. It works by
controlling the engine output and b
SEE MORE:
To adjust height
Adjust the head restraint height so that the centre of the restraint is as close
as possible to eye level to reduce the chances of injury in the event of collision.
Any person too tall for the restraint to reach their seated eye level, should
adjust the restraint as high as possible.
To raise
To reduce the set speed
There are 2 ways to reduce the set speed.
Auto–speed control lever
Pull down and hold the auto–speed control lever until you reach the lower speed
you want. Release the lever when the desired speed is reached.
To slow down in small amounts, just pull down the auto–speed control lever fo
© 2010-2025 Copyright www.mioutlander.com
