Mitsubishi Outlander: Instruments and Controls (Driver’s area)
1. Shift paddles
2. Wiper and washer switch
Rear window wiper and washer switch
3. Cruise control switches
4. Ignition switch
5. Supplemental restraint system - airbag (for driver’s seat)
Horn switch
6. Steering wheel height adjustment lever
7. Supplemental restraint system - driver’s knee airbag
8. Bluetooth® 2.0 interface
9. Bonnet release lever
10. Fuses
11. Active stability control (ASC) OFF switch
Auto Stop & Go (AS&G) OFF switch
12. Headlamp levelling switch
13. Steering wheel audio remote control switches
14. Combination headlamps and dipper switch
Turn-signal lever
Front fog lamp switch
Rear fog lamp switch
Headlamp washer switch
15. Multi-information meter switch
16. Instruments
1. Shift paddles
2. Instruments
3. Multi-information meter switch
4. Wiper and washer switch
Rear window wiper and washer switch
5. Cruise control switches
6. Headlamp levelling switch
7. Active stability control (ASC) OFF switch
Auto Stop & Go (AS&G) OFF switch
8. Bonnet release lever
9. Ignition switch
10. Supplemental restraint system - driver’s knee airbag
11. Steering wheel height adjustment lever
12. Bluetooth® 2.0 interface
13. Supplemental restraint system - airbag (for driver’s seat)
Horn switch
14. Steering wheel audio remote control switches
15. Combination headlamps and dipper switch
Turn-signal lever
Front fog lamp switch
Rear fog lamp switch
Headlamp washer switch
READ NEXT:
Instruments and controls
1. Ventilators
2. Front passenger’s airbag OFF indication lamp
3. Gearshift or selector lever
4. Supplemental restraint system - airbag (for front passenger’s seat)
5. Front passenger’s
Centre panel
1. Audio
MITSUBISHI Multi-Communication System®
Refer to the separate “MITSUBISHI Multi-Communication System owner’s manual”
2. Front passenger seat belt warning lamp
3. Rear window demis
Interior
1. Electric window control switch
2. Lock switch
3. Electric remote-controlled outside rear-view mirrors switch
4. Central door lock switch
5. Front room & map lamps
6. Sunroof switch
SEE MORE:
Engine coolant temperature display
This indicates the engine coolant temperature.
If the coolant becomes hot, will
blink.
Pay careful attention to the engine coolant temperature display while you are
driving.
Caution
► If the engine is overheating,
will blink. In this case, the bar
graph is on the red zone.
lmm
Average fuel consumption display
This displays the average fuel consumption from the last reset to the present
time.
There are the following 2 mode settings.
For information on how to change the average fuel consumption display setting,
refer to “Changing the function settings (when the ignition switch is “ON”)”.
T
