Mitsubishi Outlander manuals

Mitsubishi Outlander: Licence plate lamps

Remove the lens mounting screws, remove the lens, then remove the bulb by pulling

Remove the lens mounting screws, remove the lens, then remove the bulb by pulling out.

READ NEXT:

 Room lamps

Insert a straight blade (or minus) screwdriver into the notch of the lamp assembly and pry gently to remove the lens. Remove the lamp bulb from the lamp holder. NOTE Wrap a piece of cloth aroun

 Spot lamps

Insert a straight blade (or minus) screwdriver into the notch of the lamp assembly and pry gently to remove the lens. Remove the bulb from the lamp holder. NOTE Wrap a piece of cloth around the

 Luggage compartment lamp

Insert a straight blade (or minus) screwdriver into the notch of the lens and pry gently to remove the lens. Remove the bulb from the lamp holder. NOTE Wrap a piece of cloth around the straight

SEE MORE:

 Ventilators

1- Centre ventilators 2- Side ventilators Air flow and direction adjustments 3- Ventilator dial 4- Knob – Open – Close Set the ventilator dial (3) to the open position. Air always flows out from the ventilator when the blower is switched on. Adjust the direction of the air flow b

 Side airbag system

The side airbags (A) are contained in the driver and front passenger seatbacks. The side airbag is designed to inflate only on the side of the vehicle that is impacted, even with no passenger in the front seat. The label shown here is attached to the seatbacks with a side airbag.

© 2010-2025 Copyright www.mioutlander.com