Mitsubishi Outlander: Room lamps
Insert a straight blade (or minus) screwdriver into the notch of the lamp assembly and pry gently to remove the lens.
Remove the lamp bulb from the lamp holder.
NOTE
Wrap a piece of cloth around the straight blade (or minus) screwdriver in order to avoid scratching the lens.
READ NEXT:
Spot lamps
Insert a straight blade (or minus) screwdriver into the notch of the lamp assembly
and pry gently to remove the lens.
Remove the bulb from the lamp holder.
NOTE
Wrap a piece of cloth around the
Luggage compartment lamp
Insert a straight blade (or minus) screwdriver into the notch of the lens and
pry gently to remove the lens.
Remove the bulb from the lamp holder.
NOTE
Wrap a piece of cloth around the straight
Maintenance
Adequate care of your vehicle at regular intervals serves to preserve the value
and appearance as long as possible.
Some maintenance items can be carried out by the owner (do it yourself), while
SEE MORE:
Headlamps (high/low beam, for vehicles with high intensity discharge headlamps)
Do not attempt to disassemble or repair headlamps, and do not attempt to replace
their bulbs.
Warning
► A high voltage is present in the power circuit and in the bulbs and bulb
terminals.
To avoid the risk of an electric shock, contact a MITSUBISHI MOTORS Authorized Service
Point whe
Front passenger’s airbag OFF indication lamp
The front passenger’s airbag OFF indication lamp is located in the instrument
panel.
The indication lamp normally comes on when the ignition switch is turned to the
“ON” position, and goes off a few seconds later.
When the front passenger’s airbag ON-OFF switch is turned OFF, the ind
© 2010-2026 Copyright www.mioutlander.com
