Mitsubishi Outlander: Manual remote-controlled outside rear-view mirrors*

Adjust the mirrors by operating the lever as indicated by the arrows.
1- Left and right
2- Up and down
READ NEXT:
The outside rear–view mirrors can be operated when the ignition switch is in
the “ON” or “ACC” position.
Place the lever (A) to the same side as the mirror whose adjustment is desired.
On slippery surfaces, traction control (TCL) prevents the drive wheels (front
wheels) from excessive spinning, thus helping the vehicle to start easily.
Slip control prevents the drive wheels (front wheels) from excessive spinning
during starting or while making accelerated turn on slippery roads to avoid losing
the driving force of the front whee
SEE MORE:
If a hand or head is trapped in a closing window, the window glass will lower
automatically.
Please ensure that nobody puts their head or hand out the window when closing.
The lowered window will become operational after a few seconds.
CAUTION
The safety mechanism is cancelled just before the
The rear–centre three–point seat belt must be worn correctly as shown in the
illustration.
1. Pull the seat belt and fit tongue (A) into the black buckle (C). 2. Push
tongue (B) firmly into the red buckle (D).
When the rear–centre three–point seat belt is not being used, stow the
© 2010-2026 Copyright www.mioutlander.com
