Mitsubishi Outlander manuals

Mitsubishi Outlander: Manual transmission

The shift pattern is shown on the gearshift lever knob. Be sure to always fully

The shift pattern is shown on the gearshift lever knob. Be sure to always fully depress the clutch pedal before attempting to shift the lever.

READ NEXT:

 For smooth gearchanging

Depress the clutch pedal completely. 1st and 2nd gear: first move the gear lever fully left and then forward or back into 1st and 2nd gear. 3rd and 4th gear: move the gear lever forward or b

 Changing gears

Always use care to change the gear with the vehicle speed matched to the engine speed. Proper shifting will improve fuel economy and prolong engine life. Avoid shifting down at high speed, as this

 Automatic transmission INVECS–II 4A/T, Sports Mode 4A/T (Intelligent & Innovative Vehicle Electronic Control System II)

Designed for optimum control and equipped with adaptive control capabilities, the electronically controlled transmission optimally matches gear shifts to almost all driving and road conditions. C

SEE MORE:

 Diesel preheat indication lamp (diesel-powered vehicles)

This indication lamp illuminates when the ignition switch is placed in the “ON” position. As the glow plug becomes hot, the lamp goes out and the engine can be started. Note ► If the engine is cold, the diesel preheat indication lamp is on for a longer time. ► When the en

 On a flooded road

► Avoid flooded roads. Water could enter the brake discs, resulting in temporarily ineffective brakes. In such cases, lightly depress the brake pedal to see if the brakes operate properly. If they do not, lightly depress the pedal several times while driving in order to dry the brake pa

© 2010-2026 Copyright www.mioutlander.com