Mitsubishi Outlander: High–mounted stop lamp
Mitsubishi Carisma / Mitsubishi Carisma Owner's Manual / For emergencies / Replacement of lamp bulbs / High–mounted stop lamp
Hatchback
Place the groove of clip top as shown, then remove the cover.
Undo bolts (A), remove the lamp body, and disconnect the connector.
Undo screws (B) and take the bulb out of its socket.
READ NEXT:
Sedan
Place the grove of clip top as shown, then remove the cover.
Remove the bulb from the socket by turning it anticlockwise while pressing it
inward.
Licence plate lamps
Remove the lens mounting screws, remove the lens, then remove the bulb by pulling
out.
Room lamps
Insert a straight blade (or minus) screwdriver into the notch of the lamp assembly
and pry gently to remove the lens.
Remove the lamp bulb from the lamp holder.
NOTE
Wrap a piece of cloth aroun
SEE MORE:
Possible driving speed
Avoid shifting down at high speed, as this may cause excessive engine speed (the
tachometer needle into the red zone) and damage the engine.
Petrol-powered vehicles without MIVEC engine
Use 5 th gear whenever vehicle speed allows, for maximum fuel economy.
Petrol-powered vehicles with MIVEC e
To turn from “ACC” to “LOCK”
1. [Vehicles equipped with M/T]
Push the emergency key in at the “ACC” position and keep it depressed until it is
turned to the “LOCK” position, and remove it.
[Vehicles equipped with CVT or Twin Clutch SST]
First, set the selector lever (CVT) or the gearshift lever (Twin Clutch SST) to
© 2010-2025 Copyright www.mioutlander.com
