Mitsubishi Outlander: Sedan
Place the grove of clip top as shown, then remove the cover.
Remove the bulb from the socket by turning it anticlockwise while pressing it inward.
READ NEXT:
Licence plate lamps
Remove the lens mounting screws, remove the lens, then remove the bulb by pulling
out.
Room lamps
Insert a straight blade (or minus) screwdriver into the notch of the lamp assembly
and pry gently to remove the lens.
Remove the lamp bulb from the lamp holder.
NOTE
Wrap a piece of cloth aroun
Spot lamps
Insert a straight blade (or minus) screwdriver into the notch of the lamp assembly
and pry gently to remove the lens.
Remove the bulb from the lamp holder.
NOTE
Wrap a piece of cloth around the
SEE MORE:
Clutch fluid
Petrol-powered vehicle
To check the clutch fluid
To check the clutch fluid The clutch fluid in the master cylinder should be checked
when performing other underhood services. In addition, the system should be checked
for leakage at the same time.
Check to make certain that the clutch fluid le
Wiper and washer switch
Windscreen wipers
The windscreen wipers can be operated with the ignition switch in the “ON” or
“ACC” position.
If the blades are frozen to the windscreen or rear window, do not operate the
wipers until the ice has melted and the blades are freed, otherwise the wiper motor
may be dam
© 2010-2026 Copyright www.mioutlander.com
