Mitsubishi Outlander: Multi-information meter switch
Each time the multi-information meter switch is operated, a sound is emitted and the multi-information display changes between information such as warnings, odometer (Type 1), tripmeter, service reminder, engine coolant temperature (Type 1), average and momentary fuel consumption, driving range, and average speed.
It is also possible to change elements such as the language and units used on the multi-information display by operating the multi-information meter switch.
mark display screen (when the ignition
switch or the operation mode is OFF)
If you press the multi-information meter switch and return from the warning display
screen to the previous screen, the
mark is displayed.
Refer to “To return to the screen displayed before the warning display”.
This mark is also displayed if there is another warning other than the one displayed.
When the cause of the warning display is eliminated, the
mark goes out automatically.
NOTE
• When the mark is displayed,
the warning display screen can be redisplayed on the information screen.
Refer to “Information screen (when the ignition switch or the operation mode is OFF)”.
Refer to “Information screen (when the ignition switch or the operation mode is ON)”.
READ NEXT:
Information screen (when the ignition switch or the operation mode is OFF)
Each time you lightly press the multi-information meter switch, the display screen
switches in the following order.
1- Odometer (Type 1)/Tripmeter
2- Odometer (Type 1)/Tripmeter
3- Servic
Odometer/Tripmeter
Each time you lightly press the multi-information meter switch, the display screen
switches.
Odometer/Tripmeter → Odometer/Tripmeter
→ Service reminder → Redisplay of a
warnin
Interrupt display screen (when the ignition switch or the operation mode is
OFF)
When there is information to be announced, such as lamp reminders, the buzzer
sounds and the multiinformation display switches to the warning display screen.
Refer to the appropriate page and take
SEE MORE:
Rear window demister switch
The rear window demister switch can be operated when the engine is running.
Push the switch to turn on the rear window demister.
It will be turned off automatically in about 20 minutes. To turn off the demister
within about 20 minutes, push the switch again.
The indication lamp (A) will illumin
3-point type seat belt (with emergency locking mechanism)
This type of belt requires no length adjustment.
Once worn, the belt adjusts itself to the movement of the wearer, but in the
event of a sudden or strong shock, the belt automatically locks to hold the wearer’s
body.
NOTE
• You can check if the belt locks by pulling it forward quickly.
