Mitsubishi Outlander manuals

Mitsubishi Outlander: Odometer/Tripmeter

The operation method is the same as when the ignition switch or the operation

The operation method is the same as when the ignition switch or the operation mode is OFF.

Refer to “Odometer/Tripmeter” for further details.

READ NEXT:

 Service reminder

This displays the distance and number of months until the next periodic inspection. Refer to “Service reminder”.

 Engine coolant temperature display

This indicates the engine coolant temperature. If the coolant becomes hot, will blink. Pay careful attention to the engine coolant temperature display while you are driving. CAUTION • If

 Driving range display

This displays the approximate driving range (how many more kilometres or miles you can drive). When the driving range falls below approximately 50 km (30 miles), “---” is displayed. Refuel as

SEE MORE:

 Changing the function settings (when the ignition switch or the operation mode is ON)

1. Stop the vehicle in a safe place. Firmly apply the parking brake and put the gearshift lever into the “N” (Neutral) position (M/T) or the selector lever into the “P” (PARK) position (CVT). 2. Lightly press the multi-information meter switch a few times to switch the information scre

 Reversing sensor system

This system operates when you are backing the vehicle. It uses corner and back sensors to detect an obstacle and the information screen in the multi-information display and the buzzer to inform you of the approximate distance to the obstacle. Caution ► The reversing sensor system assis

© 2010-2025 Copyright www.mioutlander.com