Mitsubishi Outlander: Engine coolant temperature display
Mitsubishi ASX / Mitsubishi ASX Owner's Manual / Instruments and controls / Multi-information display / Engine coolant temperature display
This indicates the engine coolant temperature.
If the coolant becomes hot, 
will
blink.
Pay careful attention to the engine coolant temperature display while you are driving.
CAUTION
• If the engine is overheating,
will blink. In this case, the bar
graph is on the red zone.
lmmediately park the vehicle in a safe place and take the required measures. Refer to “Engine overheating”.
READ NEXT:
Driving range display
This displays the approximate driving range (how many more kilometres or miles
you can drive).
When the driving range falls below approximately 50 km (30 miles), “---” is displayed.
Refuel as
Average speed display
This displays the average speed from the last reset to the present time.
There are the following 2 mode settings.
For the method for changing the average speed display setting, refer to “Changing
Average fuel consumption display
This displays the average fuel consumption from the last reset to the present
time.
There are the following 2 mode settings.
For information on how to change the average fuel consumption display s
SEE MORE:
Door ajar prevention system
When the ignition switch is in the “LOCK” (PUSH OFF) position, if you try to
lock the doors and rear hatch by pressing the driver’s or front passenger’s door
lock/unlock switch, or the rear hatch LOCK switch with one of the doors or the rear
hatch not completely closed, a warning is
Starting the engine
[For vehicles equipped with the keyless operation system].
For information on operations for vehicles equipped with the keyless operation
system, refer to “Keyless operation system:
Starting”, 1-30.
[Except for vehicles equipped with the keyless operation system].
Tips for starting
Do not
© 2010-2026 Copyright www.mioutlander.com
