Mitsubishi Outlander: Operation under adverse driving conditions
Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / For emergencies / Operation under adverse driving conditions
READ NEXT:
On a flooded road
► Avoid flooded roads. Water could enter the brake discs, resulting in temporarily
ineffective brakes. In such cases, lightly depress the brake pedal to see if the
brakes operate properly.
On a snow-covered or frozen
► When driving on a snow-covered or frozen road, it is recommended that you use
snow tyres or tyre chains. Refer to the “Snow tyres” and “Tyre chains” sections.
► Avoid high-spe
On a bumpy or rutted road
Drive as slow as possible when driving on bumpy or rutted roads.
Caution
► The impact on tyres and/or wheels when driving on a bumpy or rutted road
can damage the tyre and/or wheel.
►
SEE MORE:
When turning from “ACC” to “LOCK”
[Vehicles equipped with M/T] Put the gearshift lever into the “N” (Neutral) position,
and slowly turn the ignition switch to the “LOCK” position while pressing it.
[Vehicles equipped with CVT or Twin Clutch SST] First, set the selector lever
(CVT) or the gearshift lever (Twin Clutch SST
To install
Align the tyre valve with the valve opening provided on the wheel cover.
Then tap around the outer edge of the wheel cover with your hand to secure it
in place.
NOTE
Full wheel covers have a symbol mark provided on the reverse side to show
the air valve location.
Before installing the whee
© 2010-2026 Copyright www.mioutlander.com
