Mitsubishi Outlander: Passenger’s switches
Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / Locking and unlocking / Electric window control / Electric window control switch / Passenger’s switches
The passenger’s switches can be used to operate the corresponding passenger’s door windows. Press the switch down for operating the window, and pull up the switch for closing.
Note
► Repeated operation with the engine stopped will run down the battery. Operate the electric window switches only while the engine is running.
READ NEXT:
Lock switch
When this switch is operated, the passenger’s switches cannot be used to open
or close the door windows and the driver’s switch cannot open or close any door
windows other than the driver’s
Timer function
The door windows can be opened or closed for 30 seconds after the ignition switch
is turned from the “ON” position to the “ACC” or “LOCK” position.
However, once the driver’s door or
Safety mechanism (driver’s door window only)
If a hand or head is trapped in the closing window, it will lower automatically.
Nonetheless, make sure that nobody puts their head or hand out of the window
when closing the driver’s door window
SEE MORE:
On a snow-covered or frozen road
(1) When driving on a snow–covered or frozen road, it is recommended that you
use snow tyres or tyre chains. Refer to the “Snow tyres” and “Tyre chains” sections.
(2) Avoid high–speed operation, sudden acceleration, abrupt brake application and
sharp cornering. (3) Depressing the b
System armed mode
(The buzzer stops and the security indicator continues to blink with indicator’s
reduced lit-up duration time.) Once the system preparation mode has ended, the system
armed mode starts.
If an unlawful opening of any of the doors, rear hatch or bonnet is detected
during the system armed mode
© 2010-2025 Copyright www.mioutlander.com
