Mitsubishi Outlander manuals

Mitsubishi Outlander: Rear shelf panel (Hatchback)

To remove

To remove

1. Pull the knob and tilt the rear seat back slightly forward.
2. Slightly lift up the front edge of the rear shelf. Slide the rear shelf rearward by tapping it lightly at the right and left sides to release the pins from the catches.
3. Lift the rear shelf and remove it.

READ NEXT:

 Installation position for first–aid kit

Hatchback The trunk side trim is provided with the securing bands for the first–aid kit. 1- Securing bands for the first–aid kit. Sedan To approach to the securing bands for the first–ai

 Cargo net*

To use, attach the cargo net to the hooks as shown in the illustration.

 Vehicle care

In order to maintain the value of your vehicle, it is necessary to perform regular maintenance using the proper procedures. Always maintain your vehicle in compliance with any environmental pollut

SEE MORE:

 Starting

Tips for starting ► Do not operate the starter motor continuously longer than 10 seconds; doing so could run down the battery. If the engine does not start, turn the ignition switch back to “LOCK”, wait a few seconds, and then try again. Trying repeatedly with the starter motor still

 Catalytic converter

For ordinary use, there are no particular precautions except that of using unleaded petrol. The exhaust gas scavenging device with catalytic converter is extremely efficient for the reduction of noxious gases. The catalytic converter is installed in the exhaust system. It is important to ke

© 2010-2025 Copyright www.mioutlander.com