Mitsubishi Outlander: To reduce the set speed
Mitsubishi Carisma / Mitsubishi Carisma Owner's Manual / Starting and driving / Auto–speed (cruise) control* / To reduce the set speed
There are 2 ways to reduce the set speed.
Auto–speed control lever
Pull down and hold the auto–speed control lever until you reach the lower speed you want. Release the lever when the desired speed is reached.
To slow down in small amounts, just pull down the auto–speed control lever for less than 0.5 second and release it. For each operate, you will slow down by about 2.0 km/h.
Brake pedal
Use the brake pedal to reduce the vehicle’s speed and, when the desired speed is reached, pull down the auto–speed control lever.
READ NEXT:
To accelerate for passing
Depress the accelerator pedal in the normal way. When the pedal is released,
your vehicle will return to the set speed.
To deactivate
The auto–speed control can be deactivated by the following ways.
(1) Push the main switch at the end of the lever. (Main switch OFF) (2) Pull
the auto–speed control lever toward you.
The aut
To resume set speed
If the vehicle speed remains 40 km/h or higher when the auto–speed control is
deactivated by operating the auto–speed control lever or by any one of the (2) to
(7) conditions noted above, th
SEE MORE:
Operation of the outside rear-view mirrors (Vehicles equipped with mirror retractor
switch)
To fold
Within 30 seconds of locking the doors and rear hatch using the LOCK switch (1),
press the LOCK switch twice rapidly to fold the outside rear-view mirrors.
To extend
Within 30 seconds of unlocking the doors and rear hatch using the UNLOCK switch
(2), press the UNLOCK switch twice rapi
Tips for starting
(1) Do not operate the starter motor continuously for anything longer than 10
seconds; doing so could run down the battery. If the engine does not start, turn
the ignition switch back to “LOCK”, wait a few seconds, and then try again. Trying
repeatedly with the starter motor still turning
© 2010-2026 Copyright www.mioutlander.com
