Mitsubishi Outlander: Auto–speed (cruise) control*
Mitsubishi Carisma / Mitsubishi Carisma Owner's Manual / Starting and driving / Auto–speed (cruise) control*
Auto–speed control is an automatic speed control system to maintain a desired driving speed of about 40 km/h or more without operating the accelerator pedal.
This feature is especially useful for high way driving. Auto–speed control does not work at speeds below about 40 km/h.
A- Main switch
B- Auto–speed control lever
- To activate
- To increase the set speed
- To reduce the set speed
- To accelerate for passing
- To deactivate
- To resume set speed
READ NEXT:
To activate
1. Push the main switch (A) at the end of the auto–speed control lever. 2.
Pull down the lever (B) while driving at the desired speed.
When the main switch (A) is ON, the “CRUISE” indicat
To increase the set speed
There are 2 ways to increase the set speed.
Auto–speed control le
Pull up the auto–speed control lever. And hold it until you reach the higer speed
you want. Release the lever when the desir
To reduce the set speed
There are 2 ways to reduce the set speed.
Auto–speed control lever
Pull down and hold the auto–speed control lever until you reach the lower speed
you want. Release the lever when the desire
SEE MORE:
Central door locks
Vehicles without the keyless entry system and vehicles without the keyless
operation system
Using the key on driver’s door locks or unlocks driver’s doors and the tailgate.
1- Lock.
2- Unlock.
NOTE:
● If the vehicle has a Dead Lock System and the Dead Lock System is set, turning
To turn from “ACC” to “LOCK”
1. [Vehicles equipped with M/T]
Push the emergency key in at the “ACC” position and keep it depressed until it is
turned to the “LOCK” position, and remove it.
[Vehicles equipped with CVT or Twin Clutch SST]
First, set the selector lever (CVT) or the gearshift lever (Twin Clutch SST) to
© 2010-2026 Copyright www.mioutlander.com
