Mitsubishi Outlander: To accelerate for passing
Mitsubishi Carisma / Mitsubishi Carisma Owner's Manual / Starting and driving / Auto–speed (cruise) control* / To accelerate for passing
Depress the accelerator pedal in the normal way. When the pedal is released, your vehicle will return to the set speed.
READ NEXT:
To deactivate
The auto–speed control can be deactivated by the following ways.
(1) Push the main switch at the end of the lever. (Main switch OFF) (2) Pull
the auto–speed control lever toward you.
The aut
To resume set speed
If the vehicle speed remains 40 km/h or higher when the auto–speed control is
deactivated by operating the auto–speed control lever or by any one of the (2) to
(7) conditions noted above, th
SEE MORE:
Cooling
Set the mode selection dial to the “”
position.
Set the air selection switch (A) to the outside position and push the air conditioning
switch (B).
Adjust the temperature by turning the temperature control dial clockwise or anticlockwise.
Select the desired blower speed.
NOTE
If the o
How to enter PTYs in the memory
As many as 6 PTYs can be entered in the memory.
Follow the steps described below.
1. Press either the TUNE/SEEK button (5 or 6) to tune the PTY to be entered in
the memory. 2. Press one of the memory select buttons (7) for about 2 seconds
or longer. The sound will be momentarily interrupted wh
© 2010-2025 Copyright www.mioutlander.com
