Mitsubishi Outlander: Rear window demister switch
The rear window demister switch can be operated when the engine is running.
Push the switch to turn on the rear window demister.
It will be turned off automatically in about 20 minutes. To turn off the demister within about 20 minutes, push the switch again.
The indication lamp (A) will illuminate while the demister is on.
NOTE
• When the rear window demister switch is pressed, the outside rear-view mirrors are defogged or defrosted. Refer to “Heated mirror”.
• The demister switch is not to melt snow but to clear mist.
Remove snow before use of the demister switch.
• When cleaning the inside of the rear window, use a soft cloth and wipe gently along the heater wires, being careful not to damage the wires.
• Do not allow objects to touch the inside of the rear window glass, damaged or broken wires may result.
READ NEXT:
Horn switch
Press the steering wheel on or around the
mark.
Economical driving
For economical driving, there are some technical requirements that have to be
met. The prerequisite for low fuel consumption is a properly adjusted engine.
In order to achieve longer life of the ve
SEE MORE:
Changing the mode selection
To change the position and amount of air flowing from the ventilators, turn the
mode selection dial.
(Refer to “Mode selection dial”.) These symbols are used in the
next several illustrations to demonstrate the quantity of air coming from the ventilators.
: Small amount of air from the ven
Adjustable seat belt anchor (front seats)
The seat belt anchor height can be adjusted.
Move the seat belt anchor down with the lock knob (A) depressed. To move the
anchor up, slide it without depressing the lock knob (A).
Warning
► When adjusting the seat belt anchor, set it at a position that is sufficiently
high so that th
