Mitsubishi Outlander: Washer fluid
The windscreen washer fluid reservoir is in the engine compartment.
Check the washer fluid level at regular intervals and add washer fluid to reservoir if necessary.
Open the reservoir cap and check the fluid level with the dipstick.
Note
► The washer fluid container serves the windscreen, rear window and headlamps (if so equipped).
During cold weather
To ensure proper operation of the washers at low temperatures, use a fluid containing an anti-freezing agent.
READ NEXT:
Brake fluid/Clutch fluid
The brake fluid and the clutch fluid share the reservoir tank.
To check the fluid level
The fluid level must be between the “MAX” and “MIN” marks on the reservoir.
The fluid level is monitored by a float. When the brake fluid level falls below
the “MIN” mark, the brake f
Fluid type
Use brake fluid conforming to DOT3 or DOT4 from a sealed container. The brake
fluid is hygroscopic.
Too much moisture in the brake fluid will adversely affect the brake system and
clutch system,
SEE MORE:
Keyless entry system
Press the remote control switch, and all doors and the rear hatch will be locked
or unlocked as desired.
It is also possible to operate the door outside rear-view mirrors.
1- LOCK switch
2- UNLOCK switch
3- Indication lamp
Installing a child restraint system to a3-point type seat belt (with
emergency locking
mechanism)
3-point type seat belt location
The child restraint system can be fitted by using the 3-point type seat belt
at the below illustrated seating position.
Installation:
1. Fasten the seat belt to secure the child restraint system.
Make sure you hear a “click” when you insert the latch plate
© 2010-2025 Copyright www.mioutlander.com
