Mitsubishi Outlander: Selection of engine oil (diesel-powered vehicles)

(1) Select engine oil of the proper SAE viscosity number according to the atmospheric
temperature.
(2) Use engine oil conforming to the following classification:
Type 1:ACEA classification: “For service B2-96 or B3-96”
Type 2:API classification:
“For service CF”
NOTE
Use of additives is not recommended since they may reduce the effectiveness
of additives already included in the engine oil. It may result in failure of the
mechanically assembly.

READ NEXT:
The proper amount of automatic transmission fluid is essential to the life and
operation of the automatic transmission. Either insufficient fluid or excessive
fluid could cause transmission trou
A translucent coolant reserve tank is located in the engine compartment. The
coolant level in this tank should be kept between the two marks on the reserve tank
when measured while the engine is
The engine coolant contains an ethylene glycol anti–corrosion agent. The cylinder
head and water pump housing are cast aluminium alloy, and periodic changing of the
engine coolant is necessary t
SEE MORE:
To park the vehicle, first bring in to a complete stop, fully engage the parking
brake.
To apply
1- Pull the lever up without pushing the button at the end of hand grip.
To release
1- Pull the lever up slightly.
2- Push the button at the end of hand grip.
3- Push the lever downward.
C
Your vehicle contains batteries and/or accumulators.
Do not mix with general household waste.
For proper treatment, recovery and recycling of used batteries, please take them
to applicable collection points, in accordance with your national legislation and
the Directives 2006/66/EC.
By disp
© 2010-2026 Copyright www.mioutlander.com
