Mitsubishi Outlander: Service reminder
Displays the approximate time until the next periodic inspection recommended by MITSUBISHI MOTORS. “---” is displayed when the inspection time has arrived.
NOTE
• Depending on the vehicle specifications, the displayed time until the next periodic inspection may differ from that recommended by MITSUBISHI MOTORS.
In addition, the display settings for the next periodic inspection time can be modified.
To modify the display settings, have it adjusted at a MITSUBISHI MOTORS Authorized Service Point.
For more details, consult a MITSUBISHI MOTORS Authorized Service Point.
1. Displays the time until the next periodic inspection.
NOTE
• The distance is shown in units of 100 km (100 miles). The time is shown in units of months.
2. This informs you that a periodic inspection is due. We recommend you to consult a MITSUBISHI MOTORS Authorized Service Point.
At that time, when the ignition switch is switched from the “LOCK” position to the “ON” position or the operation mode is changed from OFF to ON, the warning display is displayed for a few seconds on the information screen.
3. After your vehicle is inspected at a MITSUBISHI MOTORS Authorized Service Point, it displays the time until the next periodic inspection.
To reset
The “---” display can be reset while the ignition switch or the opertion mode is in OFF. When the display is reset, the time until the next periodic inspection is displayed and the warning display is no longer displayed when the ignition switch is turned from the “LOCK” position to the “ON” position or the operation mode is changed from OFF to ON.
1. When you lightly press the multi-information meter switch a few times, the information screen switches to the service reminder display screen.
2. Press and hold the multi-information meter switch for about 2 seconds or more
to display 
and make it flash. (If there
is no operation for about 10 seconds with flashing, the display returns to the previous
screen.)
3. Lightly press the multi-information meter switch while the icon is flashing to change the display from “---” to “CLEAR”. After this, the time until the next periodic inspection will be displayed.
CAUTION
• The customer is responsible for making sure that periodic inspection and maintenance are performed. Inspections and maintenance must be performed to prevent accidents and malfunctions.
NOTE
• “---”display cannot be reset when the ignition switch or the operation mode is in ON.
• When “---” is displayed, after a certain distance and a certain period of time, the display is reset and the time until the next periodic inspection is displayed.
• If you accidentally reset the display, we recommend you to consult a MITSUBISHI MOTORS Authorized Service Point.
READ NEXT:
Door ajar warning display screen (when the ignition switch or the operation
mode
is ON)
If any of the doors or the tailgate is not completely closed, this displays the
open door or tailgate.
If the vehicle speed exceeds approximately 8 km/h (5 mph) while a door is ajar,
a buzzer s
Changing the function settings (when the ignition switch or the operation
mode
is ON)
1. Stop the vehicle in a safe place.
Firmly apply the parking brake and put the gearshift lever into the “N” (Neutral)
position (M/T) or the selector lever into the “P” (PARK) position (CVT
SEE MORE:
Trailer towing
In order to tow a trailer with your vehicle, a trailer towing device that meets
all relevant regulations in your area has to be mounted. The regulations concerning
the towing of a trailer may differ from country to country. You are advised to obey
the regulations in each area.
CAUTION
Danger
Front passenger’s airbag OFF indication lamp
The front passenger’s airbag OFF indication lamp is located in the instrument
panel.
The indication lamp normally comes on when the ignition switch is turned to the
“ON” position, and goes off a few seconds later.
When the front passenger’s airbag ON-OFF switch is turned OFF, the ind
