Mitsubishi Outlander: Sunroof
The sunroof can only be operated with the ignition switch in the “ON” position.
1- Open
2- Tilt up
3- Close, Tilt down
To open, press the switch (1).
To stop the moving sunroof, press switch (2) or (3).
Note
► The sunroof automatically stops just before reaching the fully open position.
Press the switch again to fully open it.
To close, press the switch (3).
To stop the moving sunroof, press the switch (1) or (2).
To tilt up, press the switch (2).
The rear edge of the sunroof rises for ventilation.
To tilt down, press the switch (3).
Warning
► Do not put head, hands or anything else out of the sunroof opening while
driving the vehicle.
► Never leave a child (or other person who might not be capable of safe operation
of the sunroof switch) in the vehicle alone.
► Before operating the sunroof, make sure that nothing is capable of being trapped
(head, hand, finger, etc.).
READ NEXT:
Timer function
The sunroof can be opened or closed for 30 seconds after the ignition switch
is turned from the “ON” position to the “ACC” or “LOCK” position.
If the driver’s door is opened during th
Safety mechanism
If a hand or head is trapped in the closing sunroof, it will reopen automatically.
Nonetheless, make sure that nobody puts their head or hand out of the sunroof
when opening or closing.
The opened
Sunshade
Slide the sunshade manually to open and close it.
Caution
► Be careful that hands are not trapped when closing the sunshade.
Note
► Be sure to tilt down the sunroof before closing
SEE MORE:
Adjustable seat belt anchor (front seats)
The seat belt anchor height can be adjusted.
Move the seat belt anchor down with the lock knob (A) depressed. To move the
anchor up, slide it without depressing the lock knob (A).
Warning
► When adjusting the seat belt anchor, set it at a position that is sufficiently
high so that th
SRS servicing
The entire SRS including air bag and pretensioner seat belt must be inspected
by an authorized MITSUBISHI dealer after 10 years.
WARNING
(1) Any maintenance performed on or near the components of the SRS must
be performed only by an authorized MITSUBISHI dealer. Do not permit anyone else
to
