Mitsubishi Outlander: To adjust seat height (driver’s side only)
Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / Seat and seat belts / Front seat / To adjust seat height (driver’s side only)
READ NEXT:
Manual type
Operate the lever repeatedly to raise or lower the seat.
1- Raise
2- Lower
Power type
To adjust the seat height, operate the switch as indicated by arrows.
Note
► To prevent the battery from running down, operate the power type seat with
the engine running.
1- To move the
Heated seats
The heated seats can be operated with the ignition switch in the “ON” position.
Operate the switch as indicated by arrows.
The indication lamp (A) will illuminate while the heater is on.
1 (
SEE MORE:
Parking on a hill
To prevent the vehicle from rolling, follow these procedures:
Parking on a downhill slope
Turn the front wheels towards the kerb and move the vehicle forward until the
kerb side wheel gently touches the kerb.
On vehicles equipped with M/T, apply the parking brake and place the gearshift
lever
Other interrupt displays (when the ignition switch is “ON”)
The operation status of each system is displayed on the information screen. Refer
to the appropriate page for the system for further details.
This informs you that a periodic inspection is due.
The setting for rest interval can be changed.
© 2010-2025 Copyright www.mioutlander.com
