Mitsubishi Outlander: To lock or unlock with the key
Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / Locking and unlocking / Doors / To lock or unlock with the key
1- Lock
2- Unlock
Note
► On vehicles equipped with the central door lock switch, when locking or unlocking with the key, only the driver’s door will be locked or unlocked.
To lock or unlock all doors and the rear hatch, use the central door lock switch, the keyless entry system or the keyless operation function.
Refer to “Central door locks”.
Refer to “Keyless entry system” on pages 1-04 and 1-23, and “To operate using the keyless operation function”.
► If the vehicle is equipped with the keyless operation system, the door can be locked or unlocked with the emergency key. Refer to “Emergency key”.
READ NEXT:
To lock or unlock from inside the vehicle
1- Lock
2- Unlock
Pull the inside door handle towards you to open the door.
Note
► The driver’s door can be opened without using the lock knob by pulling on the
inside door handle.
E
To lock without using the key
Set the inside lock knob (1) to the locked position, and close the door (2).
Note
► The driver’s door cannot be locked using the inside lock knob while the driver’s
door is opened.
Ignition switch ON reminder system
When the engine was started using the keyless operation function
If the driver’s door is opened with the ignition switch in any position other
than “LOCK” (PUSH OFF) after turning off the e
SEE MORE:
Turn/lane-change signals
The turn-signal lamps flash when the switch is operated (with the ignition switch
“ON”). At the same time, the turn signal indicator flashes.
1- Turn-signals
When making a normal turn, use position (1). The lever will return automatically
when cornering is completed. There are times when
To change the language of PTY display
You can select your favourite language between English, French, German, Swedish,
Spanish and Italian.
1. Turn off the radio. 2. Turn the radio back on while holding down the PTY
button (B). 3. An alarm will sound and the system will enter PTY Language Switching
mode. 4. Use the H button (C) o
© 2010-2026 Copyright www.mioutlander.com
