Mitsubishi Outlander: To remove
Remove the child restraint in accordance with the instructions provided by the child restraint system’s manufacturer.
READ NEXT:
Installing a child restraint system to a 3-point type seat belt (with emergency
locking mechanism)
Installation:
1. Fasten the seat belt to secure the child restraint system. Make sure you hear
a “click” when you insert the latch plate in the buckle.
2. Remove all slack by using the locki
Seat belt inspection
► Check the belts for cuts, worn or frayed webbing and for cracked or deformed
metallic parts. Replace the belt assembly if it is defective.
► A dirty belt should be cleaned with neutra
Supplemental restraint system (SRS) - airbag
The information written in this Supplemental Restraint System (SRS) section contains
important points concerning the driver, front passenger, driver’s knee, side and
curtain airbags.
The SRS dr
SEE MORE:
Anti–lock brake system (ABS)*
Environmental conditions can have an effect on braking. During sudden braking
when there is snow, ice, oil, water etc. on the road surface, a skid may occur.
In this situation, steering control and braking effectiveness is reduced and the
stopping distance is increased. The vehicle may also go
Demisting of the windscreen and door windows
CAUTION
For safety, make sure you have a clear view through all windows.
To remove frost or mist from the windscreen and door windows, use the mode selection
dial (“” or “”).
- To keep the windscreen and door
windows clear of mist, and to keep leg area heating (when driving in rain
© 2010-2026 Copyright www.mioutlander.com
