Mitsubishi Outlander: Using the inside lock knob on the driver’s door
Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / Locking and unlocking / Central door locks / Type 2 (Except for vehicles equipped with the central door lock switch) / Using the inside lock knob on the driver’s door
Using the inside lock knob on the driver’s door locks or unlocks all doors and rear hatch.
1- Lock
2- Unlock
READ NEXT:
To unlock the doors and rear hatch
You can select the function to unlock the doors and rear hatch either using the
ignition switch position or using the selector lever position (CVT) or the gearshift
lever position (Twin Clutch SST
Dead Lock System
The Dead Lock System helps to prevent theft.
When the keyless entry system or the keyless operation function has been used
to lock all of the doors and rear hatch, the Dead Lock System makes it imp
Setting the system
1. Turn the ignition switch to the “LOCK” position.
Also, if a key was used to start the engine, remove the key from the ignition
switch.
2. Get out of the vehicle. Close all doors and rear ha
SEE MORE:
Installation of accessories
Before fitting any accessories, please consult your authorized MITSUBISHI dealer.
(1) The installation of accessories, optional parts, etc., should only be carried
out within the limits prescribed by law in your country, and in accordance with
the guidelines and warnings contained within the do
Change of the blower speed
Adjust the blower speed by turning the blower speed selection dial clockwise
or anticlockwise.
The blower speed will gradually increase as the dial is turned to the right.
Blower speed indicator (A) is displayed in the multi centre display.
© 2010-2025 Copyright www.mioutlander.com
